[1]邓 琪,张宏友,陈晓祺,等.有限导流垂直裂缝井测试时间校正系数[J].复杂油气藏,2019,12(01):61.[doi:10.16181/j.cnki.fzyqc.2019.01.013]
 DENG Qi,ZHANG Hongyou,CHEN Xiaoqi,et al.Calibration coefficient of testing time for finiteconductivity vertically fractured well[J].Complex Hydrocarbon Reservoirs,2019,12(01):61.[doi:10.16181/j.cnki.fzyqc.2019.01.013]
点击复制

有限导流垂直裂缝井测试时间校正系数()
分享到:

《复杂油气藏》[ISSN:1674-4667/CN:31-2019/TQ]

卷:
12卷
期数:
2019年01期
页码:
61
栏目:
油气开发
出版日期:
2019-03-25

文章信息/Info

Title:
Calibration coefficient of testing time for finiteconductivity vertically fractured well
作者:
邓 琪张宏友陈晓祺汪全林肖 波
中海石油(中国)有限公司天津分公司 天津 300459
Author(s):
DENG Qi ZHANG Hongyou CHEN Xiaoqi WANG Quanlin XIAO Bo
CNOOC Tianjin Branch, Tianjin 300459, China
关键词:
稠油油藏 探井 初期产能 有限导流 时间校正系数
Keywords:
heavy oil reservoir exploratory well the initial productivity finite conductivity testing time calibration coefficient
分类号:
TE328
DOI:
10.16181/j.cnki.fzyqc.2019.01.013
文献标志码:
A
摘要:
针对渤海稠油油藏测试出砂,试井曲线出现有限导流特征,导致初期测试产能难以准确校正的问题,利用不稳定渗流力学有限导流垂直裂缝井模型,分析不同时刻不同裂缝特征的测试比采油指数变化规律,得到不同情况下的测试产能时间校正系数。统计发现裂缝长度越长,储层流体的流度越小,对应的时间校正系数越低。在此基础上得到了不同裂缝特征下的时间校正系数公式。实例应用结果表明,所得时间校正系数计算式能更准确校正稠油测试出砂井的初期产能,可用于指导海上稠油油藏的产能评价。
Abstract:
Because well testing curve presents finite conductivity features caused by testing sanding, it is difficult to accurately correct the initial testing productivity in Bohai heavy oil reservoirs. Using the finite conductivity vertically fractured well model under the condition of unstable seepage flow, it was analyzed changes in the test specific productivity index of various fracture features and times, and then it was obtained the calibration coefficients of testing time under different conditions. The analysis results indicated that the longer the fracture length was, the smaller the fluidity of reservoir fluid was, and the lower the corresponding calibration coefficient was. On this basis, it was proposed a calibration coefficient formula of testing time under the condition of various fracture features. The application results showed that the new method could more accurately correct the initial testing productivity in heavy oil wells with testing sanding, which could guide the productivity evaluation of offshore heavy oil reservoirs.

参考文献/References:

[1] 蒋廷学,单文文,杨艳丽.垂直裂缝井稳态产能的计算[J].石油勘探与开发,2001,28(2):61-63.
[2] 张伟东,杨铁军,蒋廷学等.保角变换法用于计算压裂井产能[J].油气地质与采收率,2003,10(增刊):81-82.
[3] 黄勇,李春兰,程林松,等.低渗透油藏垂直裂缝井产能评价新方法[J].油气地质与采收率,2010,17(1):99-101.
[4] 郭大立,曾晓慧,赵金洲,等.垂直裂缝井试井分析模型和方法[J].应用数学和力学,2005,26(5):527-533.
[5] 尹洪军,刘宇,付春权.低渗透油藏压裂井产能分析[J].特种油气藏,2005,12(2):55-56.
[6] 付春权,尹洪军,刘宇,等.低速非达西渗流垂直裂缝井试井分析[J].大庆石油地质与开发,2007,26(5):53-56.
[7] 刘英宪,尹洪军,苏彦春,等.三重孔隙介质油藏垂直裂缝井压力动态分析[J].特种油气藏,2008,15(3):59-61.
[8] 杨龙,王晓东,韩永新.垂直裂缝井产能递减曲线研究[J].天然气工业,2003,23(3):76-78.
[9] 赵海洋,贾永禄,蔡明金,等.低渗透双重介质垂直裂缝井产能分析[J].西南石油大学(自然科学版),2009,31(2):71-73.
[10] 戴庆,戴江,周宏权.压裂井产能预测理论曲线分析[J].西南石油大学(自然科学版),2009,31(2):74-76.
[11] 蔡晖.确定油井测试时间校正系数的新方法[J].中国海上油气,2010,22(6):391-393.
[12] 刘能强,实用现代试井解释方法(第五版)[M].北京:石油工业出版社,2008:209-214.

备注/Memo

备注/Memo:
收稿日期:2018-08-14; 改回日期:2018-09-04。第一
作者简介:邓琪(1988—),硕士,工程师,现主要从事油气田开发工程研究工作。E-mail:dengqi@cnooc.com.cn。
基金项目:“十三五”国家科技重大专项“渤海油田加密调整及提高采收率油藏工程技术示范”(2016ZX05058001)。
更新日期/Last Update: 2019-03-25