[1]薛　洋.WC-X1井空心斜向器与定向射孔技术研究及应用[J].复杂油气藏,2023,16(01):114-117.[doi:10.16181/j.cnki.fzyqc.2023.01.019]
　XUE Yang.Research and application of hollow whipstock and directional perforation technology in well WC-X1[J].Complex Hydrocarbon Reservoirs,2023,16(01):114-117.[doi:10.16181/j.cnki.fzyqc.2023.01.019]
点击复制

WC-X1井空心斜向器与定向射孔技术研究及应用()
分享到：

《复杂油气藏》[ISSN:1674-4667/CN:31-2019/TQ]

卷:
16卷
期数:
2023年01期
页码:
114-117
栏目:
油气工程
出版日期:
2023-03-25

文章信息/Info

Title:
Research and application of hollow whipstock and directional perforation technology in well WC-X1
作者:
薛　洋
中海油田服务股份有限公司，广东 湛江 524057
Author(s):
XUE Yang
China Oilfield Service Limited，Zhanjiang 524057，China
关键词:
空心斜向器; 旁通循环阀; 射孔枪; 分支井眼; 槽口
Keywords:
hollow whipstock;  bypass circulation valve;  perforating gun;  lateral wellbore;  slot
分类号:
TE243
DOI:
10.16181/j.cnki.fzyqc.2023.01.019
文献标志码:
A
摘要:
南海西部某油田存在单井采收率低、井控储量小的难题。为进一步提高单井泄油面积，提出了空心斜向器与定向射孔相结合的工艺技术。重点介绍了该技术所涉及的空心斜向器、旁通循环阀及0°相位射孔枪等配套设施。WC-X1井通过井身结构设计和侧钻点选择优化，前期采用空心斜向器侧钻分支井眼，后期利用定向射孔实现主井眼与分支井眼间的连通。在现场施工中将开窗方位与射孔方位精度控制在10°以内，同时利用空心斜向器上的标记源实现射孔深度精准定位，顺利完成分支井作业，单井产量提升至原先的2.5倍以上。该套相关技术相比其它分支井作业，不仅成本低、难度小，而且对于后续海上油田开发中提高槽口利用率，降低工程建设成本，均具有较高的推广价值。
Abstract:
There are challenges to low single well recovery rates and small well controlled reserves in an oilfield located in the western South China Sea. To further increase the single well drainage area， it is proposed a process technology combining a hollow whipstock with directional perforation. The article focuses on the supporting facilities involved in this technology， such as the hollow whipstock， bypass circulation valves， and 0° phase perforating gun. In well WC-X1， through optimization of the wellbore structure design and selection of the sidetracking point， the hollow whipstock was used to sidetrack the lateral wellbore in the early stage， and the directional perforation later was used to connect the main borehole with the branch borehole. Under construction on site， the azimuth of the window opening and perforation were controlled within 10° of each other， while the marked source on the whipstock was used to realize the precise positioning of the perforation depth， resulting in the successful completion of the branch well operation and an increase in single well production to more than 2.5 times the original. Compared with other branch well operations， this technology is not only less costly and difficult but also has a high value in promoting how to improve slot utilization and reduce construction costs in subsequent offshore oil field development.

参考文献/References:

［1］杨继明，苏峰，李波.流花4-1油田双分支井钻井技术［J］.钻采工艺，2018，41（1）：25-27.
［2］王晓鹏，许杰，张彬奇，等.渤海油田井简及井槽优化利用技术研究进展及展望［J］.中国海上油气，2022，34（1）：134-140.
［3］杨文领，张恒，王玥，等.青海油田第一口分支水平井钻完井工程实践［J］.石油钻采工艺，2015，37（6）：5-8.
［4］焦松杰.海上边底水气藏多分支井开发实践［J］.天然气勘探与开发，2019，42（1）：73-78.
［5］陈杰，武广瑷，左凯，等.国内外分支井五级完井技术发展趋势［J］.石油矿场机械，2019，48（4）：80-84.
［6］马英文，王昆剑.四级分支井钻完井技术在曹妃甸11-1油田的应用［J］.中国海上油气，2020，32（3）：124-129.
［7］刘纯仁，严忠，李玉枝.T油田套管开窗侧钻技术实践与应用［J］.复杂油气藏，2022，15（1）：101-107.
［8］唐波涛，曾冀，陈伟华，等.川中秋林地区致密砂岩水平井多簇射孔优化设计方法及应用效果［J］.油气藏评价与开发，2022，12（2）：337-344.
［9］陈军斌，魏波，王汉青.定向射孔参数对压裂裂缝扩展规律的影响［J］.断块油气田，2017，24（3）：391-395.
［10］王志伟，张杰，李文金，等.多次激活旁通阀技术及应用［J］.石油矿场机械，2017，46（6）：68-72.

备注/Memo

备注/Memo:
收稿日期：2023-01-31；改回日期：2023-02-17。
作者简介：薛洋（1982—），高级工程师，主要从事海洋油气钻完井技术方面的研究工作。E-mail：xueyang@cosl.com.cn。
更新日期/Last Update: 2023-06-01