[1]汤元春,崔永亮,钱志鸿,等.缓凝高强度调堵剂的研制与应用[J].复杂油气藏,2014,(02):76.
　Tang Yuanchun,Cui Yongliang,Qian Zhihong,et al.Study and application of conformance control or water shutoff agent with delayed cross-linking and high strength[J].Complex Hydrocarbon Reservoirs,2014,(02):76.
点击复制

缓凝高强度调堵剂的研制与应用
分享到：

《复杂油气藏》[ISSN:1674-4667/CN:31-2019/TQ]

卷:
期数:
2014年02期
页码:
76
栏目:
油气工程
出版日期:
2014-06-25

文章信息/Info

Title:
Study and application of conformance control or water shutoff agent with delayed cross-linking and high strength
作者:
汤元春1; 崔永亮1; 钱志鸿1; 马惠2; 邓秀模1; 朱伟民1
1.中国石化江苏油田分公司石油工程技术研究院，江苏扬州225009；2.中国石化江苏油田分公司试采二厂，江苏金湖211600
Author(s):
Tang Yuanchun1; Cui Yongliang1; Qian Zhihong1; Ma Hui2; Deng Xiumo1; Zhu Weimin1
1.Petroleum Engineering Technology Research Institute of Jiangsu Oilfield Company,SINOPEC,Yangzhou,Jiangsu 225009; 2.NO.2 Oil Production Plant of Jiangsu Oilfield Company,SINOPEC,Jinhu,Jiangsu 211600
关键词:
聚丙烯酰胺　丙烯酰胺　缓凝凝胶　调剖　现场应用　效果评价
Keywords:
polyacrylamide; acrylamide; delayed cross-linkinggel; conformance control; field application; effect evaluation
分类号:
TE39
文献标志码:
A
摘要:
一些特殊性油藏注水井由于注水压力高，PI值高，油水井间窜流严重，目前常用的颗粒型堵剂注不进或污染油层,凝胶型强度低堵不住水道。以丙烯酰胺、聚丙烯酰胺为主剂，研制出DHG-1和HHG-1两种新型缓凝高强度调堵剂。在70℃条件下，两种堵剂初始成胶时间由几小时延长至5d以上，终凝强度分别达到3.8×104mPa·s和1.2×104mPa·s。室内堵塞率均大于95%,通过控制注入速度，堵剂可优先进入高渗目的层，各项技术参数可满足特殊性油藏调堵的需要。两种体系单独或复合应用于韦5-8等4口井的调堵试验，措施成功率100%，已累计增油1992.3t。
Abstract:
There are high injection pressure，big PI value of injection wells，and serious channeling between oil and water wells in some special reservoirs.In these reservoirs，the common type of particle plugging agent can pollute or not be injected into the reservoirs，and the gel plugging agent can not plug water channels because of lower strength.Thus，two new types of plugging agents with delayed cross-linking and high strength，respectively called DHG-1 and HHG-1，were developed，which consis of acrylamide and polyacrylamide.Under the condition of 70 ℃，the initial gel times were extended from several hours to more than 5 days，and the final strengths were respectively 3.8×104 mPa·s and 1.4×104 mPa·s for the two systems.The lab experiments indicated that the blocking rates of the two plugging agents were more than 95%，and the plugging agent can have priority in entering the high permeability layer by controlling the injection rate，and the technical parameters can meet the needs of the special reservoirs.These two systems had been applied alone or compositely in 5 wells such as W5-8 well .The success rate of measures was 100%，and had a cumulative incremental oil of 1992.3 tons.

参考文献/References:

［1］熊显忠,杨永超，李乔林.PI决策技术在断块油田调剖中的应用［J］.河南石油,2001,15(4)22-25.
［2］孙富,陈琦.PI调剖技术在长庆油田的应用［J］.重庆科技学院学报(自然科学版),2011,13(1):19-23.
［3］胡书勇,张烈辉,余华洁，等.油层大孔道调堵技术的发展及其展望［J］.钻采工艺,2006,29(6):117-120.
［4］陈玉丽.胜利油田堵水调剖技术的应用及发展方向探讨［J］.精细石油化工进展,2012,13(7):35-37.
［5］江汇.胜坨油田高温油藏深部调剖体系研究及矿场应用［J］.精细石油化工进展,2012,13(3):14-15.
［6］张建远.FH-90堵剂的研制及在新疆低渗油田的应用［J］.油田化学,2011,28(1):21-23.
［7］张代森.丙烯酰胺地层聚合交联冻胶堵调剂研究与应用［J］.油田化学,2002,19(4):337-342.
［8］于海洋,张键,王业飞,等.酚醛树脂冻胶流变性及粘弹性研究［J］.西南石油大学学报（自然科学版）,2011,33(3):159-164.

备注/Memo

备注/Memo:
收稿日期：2013-09-17；改回日期：2013-10-22
作者简介：汤元春(1967—)，高级工程师，现主要从事油田化学调剖堵水的研究与应用工作，电话：0514-87761049，E-mail:tangyc.jsyt@sinopec.com。
攻关项目：江苏油田分公司（JS11024）
更新日期/Last Update: 2014-06-25