[1]马开良,陈小元,王 建,等.小靶前距水平井反位移轨道设计方法[J].复杂油气藏,2014,(04):62.
 Ma Kailiang,Chen Xiaoyuan,Wang Jian,et al.The reversal displacement orbital design method of short pre-target distance horizontal well[J].Complex Hydrocarbon Reservoirs,2014,(04):62.
点击复制

小靶前距水平井反位移轨道设计方法
分享到:

《复杂油气藏》[ISSN:1674-4667/CN:31-2019/TQ]

卷:
期数:
2014年04期
页码:
62
栏目:
油气工程
出版日期:
2014-12-25

文章信息/Info

Title:
The reversal displacement orbital design method of short pre-target distance horizontal well
作者:
马开良陈小元王 建窦正道莫 钺
中国石化江苏油田分公司石油工程技术研究院,江苏 扬州 225009
Author(s):
Ma KailiangChen XiaoyuanWang JianDou ZhengdaoMo Yue
Petroleum Engineering Technological Research Institute of Jiangsu Oilfield Company,SINOPEC,Yangzhou 225009,China
关键词:
小靶前距 水平井 反位移 轨道设计
Keywords:
short pre-target distance horizontal well reversal displacement orbital design
分类号:
E243
文献标志码:
A
摘要:
为解决小靶前距水平井一次造斜造斜率高所造成的技术难题,采用小靶前距水平井反位移井眼轨道设计方法。使用该方法,在不移动井口位置的情况下,通过第一次反方向造斜,增大水平井的靶前距,再采用常规造斜率设计小靶前距水平井轨道,降低施工难度。主要方法是先按常规造斜率设计计算水平井所需的靶前距,此靶前距与原小靶前距的差值即为所需的反位移量,再根据反位移段的造斜率、降斜率及造斜点深度,计算出反位移井段的最大井斜角和稳斜段长度,在此基础上设计出井眼轨道的其他参数。
Abstract:
The reversal displacement orbital design method can solve the technical problems of high once build-up rate in pre-target distance horizontal well.In the case of unmoving the well head,through the first time reversal building angle,the pre-target distance of horizontal well was increased by this method.Then,the trajectory of short pre-target distance horizontal well was designed by the general build-up rate to reduce the drilling difficulty.The main method should be divided into three parts.Firstly,the pre-target distance should be designed by the general build-up rate,and the difference between one and original short pre-target distance is the required reversal displacement.Secondly,according to the build-up rate,drop-off rate,kick off point of reversal displacement well section,the maximum deviation angle and the maintain angle section can be calculated.Finally,based on the above calculation,other parameters of well trajectory could be designed.

参考文献/References:

[1] 张喜亭,安红梅,叶俊,等.除氧剂在水质达标中的作用[J].断块油气田,2008.15(3):127-128.
[2] 周立群,许艺,王玉,等.除氧技术综述[J].精细化工进展,2006.7(10):51-56.
[3] 刘运新.几种常用的锅炉给水除氧方法分析[J].天津航海,2006(2):19-20.
[4] 高夫燕,张丰田,金超,等.锅炉给水除氧技术的探讨及其进展[J].电站系统工程,2005,21(6):8-10
[5] 詹宁,刘卫强,刘建华,等.油田注气锅炉除氧剂浅析[J].化学工程与装备,2008(2):71-72.

备注/Memo

备注/Memo:
收稿日期:2014-06-20; 改回日期:2014-08-17。
作者简介:马开良(1961—),高级工程师,现从事钻井工程技术研究与应用工作。电话:0514-87762787,E-mail:makl.jsyt@sinopec.com。
攻关项目:江苏石油勘探局(JS 13021)。
更新日期/Last Update: 2014-12-25