[1]王学杰.伊朗雅达油田F23井钢丝遇卡的诊断与处理[J].复杂油气藏,2015,(04):82.
　Wang Xuejie.Diagnosing and processing of slickline stuck for Well F23 completion in Yada Oilfield of Iran[J].Complex Hydrocarbon Reservoirs,2015,(04):82.
点击复制

伊朗雅达油田F23井钢丝遇卡的诊断与处理
分享到：

《复杂油气藏》[ISSN:1674-4667/CN:31-2019/TQ]

卷:
期数:
2015年04期
页码:
82
栏目:
油气工程
出版日期:
2015-12-25

文章信息/Info

Title:
Diagnosing and processing of slickline stuck for Well F23 completion in Yada Oilfield of Iran
作者:
王学杰
中国石化国际石油勘探开发有限公司,北京 100029
Author(s):
Wang Xuejie
Sinopec International Petroleum E&P Corporation,Beijing 100029,China
关键词:
高温高压 钢丝卡钻 连续油管 卡压力计 沥青
Keywords:
HTHP;  slickline stuck;  coiled tubing;  memory gauge stuck;  asphalt
分类号:
TE257
文献标志码:
A
摘要:
伊朗雅达油田是目前世界范围内为数不多尚未开发的千万吨级整装陆上油田之一,具有高温、高压、高产、含硫和高含沥青的特点,开发难度大,成本极高。出于完井工艺需求和井筒完整性考虑,钢丝作业是必不可少的选择。F23井在试油时,为获取井底流动压力和静压力,用钢丝下入电子压力计,中途遇卡,先后经过多次震击、剪断钢丝、盲锤砸钢丝等手段打捞钢丝无效,后下铅模再次遇卡,最终采用连续油管与钢丝联合作业,打捞出全部钢丝和两串落鱼。这种处理方式对以后该油田的钢丝作业具有重要的借鉴意义。
Abstract:
Yada Oilfield of Iran is one of the ten million ton onshore monoblock oilfield which is still undeveloped in the world wide.There are HTHP,high production rate,high content H2S and high condensate asphalt for the vertical production well F23,which increase the difficulty and cost of the development.The slickline operation is necessary in consideration of completion process requirement and wellbore integrity.In order to obtain bottom hole flowing pressure and static pressure during well test,the slickline was stuck during running pressure gauge with slickline,it took complex processes to deal with the stuck,such as jarring up and down,cutting slickline,blind hammer to cut slickline,and running in lead stamp,etc.,finally coiled tubing and slickline worked together to overcome the problem and fish out all stuck fishes.It will provide some means of use for reference for dealing with such kinds of completion accidents.

参考文献/References:

[1] 李三喜,郭士生,张良宝.平湖油气田B6井钢丝打捞作业[J].中国海上油气(工程).2003,15(4):44-47.
[2] 单朝新,郭建设.钢丝打捞工艺及应用[J].钻采工艺.1999,22(3):56.
[3] 何汉平,吴俊霞,黄建林,等.伊朗雅达油田完井工艺[J].石油钻探工艺.2012,34(4):26-30.
[4] 冯敏,张伟,孔长城,等.钢丝完井技术在雅达油田的成功应用[J].油气井测试.2012,21(5):38-39.
[5] 石孝志,苏贵杰,王忠胜,等.连续油管打捞技术在川渝地区的应用[J].天然气工业[J].2007,28(8):58-60.
[6] 于东兵,包文德,马卫国,等.连续油管打捞技术专用工具研究现状及展望[J].石油机械.2007,35(1):45-47.

备注/Memo

备注/Memo:
收稿日期:2015-05-25; 改回日期:2015-10-16。
作者简介:王学杰(1982—),工程师,毕业于中国石油大学(北京)油气井工程专业,现从事海外项目油气井钻完井工作。电话:13811540857,E-mail:wxj_624@163.com。
doi:10.16181/j.cnki.fzyqc.2015.04.018
更新日期/Last Update: 2015-12-25